Custom Turnkey Solutions

Can't find a match for your specs or need a unique product to meet your requirements?

Talk to Us
We can design & manufacture turnkey custom systems that meet your specific needs!



Over the past decade, almost all building cameras used coaxial cable to transmit analogue video signals to the backend recording devices. As technological requirements increase, building surveillance systems are changing the way they connect. CCTV devices are now moving towards employing IP systems. The migration to this technology requires different cabling infrastructure to support the security requirements. Changing the cabling infrastructure can be costly and time consuming, which can give a negative impact to business operations.

Device 4U IPX-C is an essential CCTV product device that supports end-to-end IP migration strategy as it provides building owners the option for deploying IP Camera while maintaining their existing analogue coaxial cable infrastructure. By using Device4U IPX-C transceiver set, building owners are able to deploy IP camera systems as their budget permits.


  • Up to 3,000 feet (1km) via Cat5e/6
  • Up to 100/100Mbps Connection Speed
  • Supports Base 10/100Mbps Ethernet
  • Automatic Data Error Correction
  • Requires 12VDC (supplied)
  • Surge Suppression
  • Auto-resettable fuse
  • LEDs for power, Ethernet status, VDSL line statuts
  • Connects directly to any network switches and router
  • Small form factor, easily fits into many places


  • Campus
  • Highway
  • Airports
  • Hotels
  • Casinos
  • Commercial complexes
  • Remote parking lots
  • Entry gates
Hardware Specifications:
Ethernet Ports 10/100Base-TX: 1 x RJ-45, Auto-Negotiation and Auto-MDI/MDI-X
Ethernet Extender Port VDSL2+:1 x RJ-45, female Phone Jack
Phone Port N/A
DIP Switch 4 position DIP switch CO /
Functionality CPE mode select
Selectable fast and interleaved mode
Selectable target 17a / 30a profiles
Selectable target SNR mode (6dB/9dB)
Encoding VDSL-DMT - ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
LED Indicators 1 for Power
1 for VDSL2 status
1 for VDSL2 CO/CPE selection
1 for RJ-45 10/100Base-TX port status
1 for RJ-45 10/100Base-TX port speed indicator
Cabling Ethernet :
10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft)
100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft)
Twisted-pair CAT5 wires (AWG24 or better) up to 1km
Performance* (Downstream / Upstream) 30a profile
300m -> 50/50Mbps
600m -> 40/30Mbps
900m -> 20/7Mbps
Power Requirement 12V DC, 0.5A
Power Consumption 6Watts
Dimension (L x W x H) 78 x 42 x 28.5 mm
Weight 187.4g
Operating Temperature: 0 ~ 50 Degree C
Relative Humidity: 10 ~ 90% (non-condensing)
Storage Temperature: -10 ~ 70 Degree C
Relative Humidity: 10 ~ 90% (non-condensing)
Switch Specification:
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control Back pressure for half duplex
IEEE 802.3x Pause Frame for full duplex
Network cables 10/100Base-TX:
2-Pair UTP Cat. 3,4, 5 (100meters, max.)
EIA / TIA-568 100-ohm STP (100meters, max.)
Standard Conformance:
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
ITU-T - G.993.2 VDSL2 (Profile 30a)