Custom Turnkey Solutions

Can't find a match for your specs or need a unique product to meet your requirements?

Talk to Us
We can design & manufacture turnkey custom systems that meet your specific needs!

ipX-U

ipX-U

Device4U IPX-U is a revolutionary IP Video transmission product that extends your Ethernet solution far beyond the standard Ethernet distance limitations of 100m, using standard single pair copper UTP cable. IP video can now be transmitted over a distance of 1 KM using IPX-U pair of transmitter and receiver set.

Truly a plug and play wall-mount device, the transceiver set requires no programming or additional setup and saves on installation time. With built-in LED to indicate presence of power, communication link and IP signal, the IPX-U transceiver provides for easy troubleshooting and maintenance of your CCTV environment.

Highly versatile to support IP cameras that are located at remote locations or at a distance not supported by traditional network cabling, IPX-U transceivers are intelligently designed to compensate for wire attenuation, signal noise and interference that are caused from long distance cabling.

Features:

  • Up to 3,000 feet (1km) via Cat5e/6
  • Up to 100/100Mbps Connection Speed
  • Supports Base 10/100Mbps Ethernet
  • Automatic Data Error Correction
  • Requires 12VDC (supplied)
  • Surge Suppression
  • Auto-resettable fuse
  • LEDs for power, Ethernet status, VDSL line statuts
  • Connects directly to any network switches and router

Application:

  • Campus
  • Highway
  • Airports
  • Hotels
  • Casinos
  • Commercial complexes
  • Remote parking lots
  • Entry gates
Hardware Specifications:
Ethernet Ports 10/100Base-TX: 1 x RJ-45, Auto-Negotiation and Auto-MDI/MDI-X
Ethernet Extender Port VDSL2+:1 x RJ-45, female Phone Jack
Phone Port N/A
DIP Switch 4 position DIP switch CO /
Functionality CPE mode select
Selectable fast and interleaved mode
Selectable target 17a / 30a profiles
Selectable target SNR mode (6dB/9dB)
Encoding VDSL-DMT - ITU-T G.993.2 VDSL2 (Profile 17a/30a Support)
LED Indicators 1 for Power
1 for VDSL2 status
1 for VDSL2 CO/CPE selection
1 for RJ-45 10/100Base-TX port status
1 for RJ-45 10/100Base-TX port speed indicator
Cabling Ethernet :
10Base-T: 2-pair UTP Cat.3,4,5 up to 100m (328ft)
100Base-TX: 2-pair UTP Cat.5, up to 100m (328ft)
VDSL :
Twisted-pair CAT5 wires (AWG24 or better) up to 1km
Performance* (Downstream / Upstream) 30a profile
300m -> 50/50Mbps
600m -> 40/30Mbps
900m -> 20/7Mbps
Power Requirement 12V DC, 0.5A
Power Consumption 6Watts
Dimension (L x W x H) 78 x 42 x 28.5 mm
Weight 368g
Environment:
Operating Temperature: 0 ~ 50 Degree C
Relative Humidity: 10 ~ 90% (non-condensing)
Storage Temperature: -10 ~ 70 Degree C
Relative Humidity: 10 ~ 90% (non-condensing)
Switch Specification:
Switch Processing Scheme Store-and-Forward
Address Table 2K entries
Flow Control Back pressure for half duplex
IEEE 802.3x Pause Frame for full duplex
Network cables 10/100Base-TX:
2-Pair UTP Cat. 3,4, 5 (100meters, max.)
EIA / TIA-568 100-ohm STP (100meters, max.)
Standard Conformance:
Regulation Compliance FCC Part 15 Class A, CE
Standards Compliance IEEE 802.3 10Base-T
IEEE 802.3u 100Base-TX
ITU-T - G.993.2 VDSL2 (Profile 30a)